News
Honor Magic4 Mobile Phone Tour: Super Surface Design, Rear “Muse’s Eye”
Honor officially released the Magic4/ Pro series, providing 5 models: porcelain blue, flowing gold, bright black, glaze white, and burning orange (plain leather). color matching.
Package Design
The long box of the Honor Magic4 mobile phone adopts a black theme color, and the English Logo of the Honor Magic4 is on it. In addition to the mobile phone body, it also has a built-in white charger and USB-C charging cable. There is also a white plastic protective case.
Mobile phone design
The Honor Magic4 series places the periscope telephoto camera in the center of the camera module, creating a new generation of Muse’s eyes. The unique lens structure has a deep look and feel. Under the illumination of the light, a blue luster emerges, like a deep and bright eye. Rear triple camera 50MP wide-angle main camera IMX766 + 50MP ultra-wide-angle + 8MP periscope telephoto (5x optical zoom is stronger than Pro, up to 50X digital zoom)
The 6.81-inch large screen adopts the glass hot bending process to achieve a super curved surface design, which is gentle in the hand, comfortable in the hand, and more comfortable to hold. The upper and lower borders continue to drop, which is significantly smaller than the previous generation, bringing a larger screen display area.
The Honor Magic4 uses a 6.81-inch 2664*1224 resolution centered single-hole curved screen, 430PPI, 120Hz LTPO screen refresh rate, 360Hz touch sampling rate, 1920Hz high-frequency PWM dimming, and a front 12MP ultra-wide-angle.
The first 4K 60fps 10bit-log movie mode of the Honor Magic4 series, combined with the recordable brightness range of 10bit, can make the picture achieve smooth color transition and greatly improve the clarity. Honor also cooperates with IMAX, supports Magic-Log mode, and has IMX ENHANCED certification.
In addition to continuing to carry a powerful multi-camera matrix on the hardware, it has also fully upgraded the self-developed HONOR Image Engine image engine and multi-camera fusion computational photography technology, which truly means full lens participation and full focal length fusion.
In addition, Honor has also teamed up with a professional Hollywood imaging team to carefully modulate a number of film-level 3D LUTs to provide rich expression space for the mood of the tone; there is also a new upgrade of the “Recording Chinese and American Shooting” function.
This series of models is equipped with Qualcomm Snapdragon 8 Gen 1 chip + LPDDR5 memory + UFS 3.1 flash memory, using superconducting hexagonal graphene with ultra-thin VC liquid cooling, the thermal conductivity is 50% higher than the original graphene technology, and it has both heat dissipation and thinness . Built-in 4800mAh battery, 66W wired charging, wireless charging is not supported.
In other respects, the Honor Magic4 series also has OS Turbo X+GPU Turbo X technology. It is the industry’s first mobile phone that supports game AI super rendering. It is equipped with a dual TEE security system jointly developed with Qualcomm, equipped with an independent encryption chip, and runs on Android 12 . Magic UI 6.0.
Taking screenshots on our smartphones is becoming increasingly common and has become an invaluable part of our technology lives. But do you know how to take a screenshot on your Samsung Galaxy A54?
Whether you’re trying to capture a text conversation with a friend or just need to grab something quickly from the internet, we’ve got you covered with this step-by-step guide. Keep reading to find out how easy it is to take screenshots on your Samsung Galaxy A54!
How to take a screenshot using the physical buttons
- To take a screenshot using the physical buttons, simply press and hold the power button and the volume down button at the same time.
- The screen will flash, indicating that a screenshot has been taken.
- You can find the screenshot in your gallery app.
How to take a screenshot using Palm Swipe
Palm Swipe is a feature that allows you to take a screenshot on your Galaxy S23 Ultra by swiping the edge of your hand across the screen. To use Palm Swipe, follow these steps:
- Enable Palm Swipe: Go to Settings > Advanced features > Motions and gestures. Enable Palm swipe to capture.
- Take a screenshot: Place your hand vertically on either side of the screen, then swipe across the screen from one side to the other as if you were taking a photo.
Are you looking to learn how to ethernet tethering your Samsung Galaxy A53? With the ability to ethernet tethering, you can share your mobile data connection with other devices, allowing them to access the internet without a Wi-Fi network. Ethernet tethering has traditionally been done using Wi-Fi connections, but with the latest technology, you can now set up tethering using Ethernet connections.
In this guide, we’ll walk you through the steps of setting up Ethernet tethering on your Samsung Galaxy A53 smartphone. We will also discuss some of the benefits and drawbacks of using this method compared to other ways of tethering.
Enable Ethernet tethering on Galaxy A53 smartphone
- First, go to “Settings“
- Then, click on “Connections“
- Now, you will see “Mobile Hotspot and Tethering” Option, click on it.
- Then, enable “Ethernet tethering“.
We hope that this article has been able to provide you with some helpful tips and tricks for How to enable Ethernet tethering on Samsung Galaxy A53 smartphone. Now you can share your experiences or capture important information without any hassle!
Tech enthusiasts across the world have been going wild since Samsung announced the launch of the much-anticipated Samsung Galaxy Z Flip 3. From its impressive design to its cutting-edge features, this latest smartphone model is a must-have device for tech savvy users.
Unfortunately, however, some users have reported facing issues in connecting to Wifi networks with their smartphone. If you’re having trouble getting connected with your Galaxy Z Flip 3, don’t worry – we’ve got you covered! In this blog post, we’ll be taking a look at how to fix user-facing WiFi connecting issues on your Samsung Galaxy Z Flip 3. Let’s get started!
How to fix Galaxy Z Flip 3 WIFI not working issue
Restart your device
If your Samsung Galaxy device is not connecting to WiFi, the first thing you should try is restarting your device. To do this, simply power off your phone and then turn it back on. This should fix the problem if it was caused by a temporary glitch.
Toggle the Airplane Mode
If your Samsung Galaxy device is having trouble connecting to WiFi, one of the first things you should try is toggling the Airplane Mode. This setting turns off all wireless connections on your phone, which can sometimes be the cause of the problem. To toggle Airplane Mode, simply pull down the notification shade and tap on the Airplane Mode icon.
Restart Wifi Connections
If your Samsung Galaxy device is having trouble connecting to WiFi, you can try restarting your WiFi connections. To do this, go to Settings > Network & Internet > WiFi and toggle the WiFi off and on. You can also try forgetting the WiFi network and then reconnecting to it. If you’re still having trouble, you can try resetting your device’s network settings. To do this, go to Settings > General Management > Reset > Reset Network Settings.
Connect a different device
If your Samsung Galaxy device is having difficulty connecting to your WiFi network, there are a few things you can try. First, try connecting a different device to the WiFi network. If that device is able to connect without any problems, then the issue is most likely with your phone and not the WiFi network.
Check update
If your phone is having trouble connecting to WiFi, the first thing you should do is check for any available updates. To do this, go to Settings > About device > Software update and see if there are any updates available. If there are, install them and see if that fixes the problem.
Restore Factory
If your Samsung Galaxy device is having trouble connecting to Wi-Fi, you can try restoring the factory settings. This will reset all of your network settings, including your Wi-Fi passwords, so make sure to write them down before you begin. To restore your Galaxy S Ultra to its factory settings:
- Open the Settings app and tap “General management.”
- Tap “Reset.”
- Tap “Factory data reset.”
- Tap “Reset device.”
- Enter your PIN or password if prompted.
- Tap “Continue.”
- Tap “Delete all.”
Could It Be A Hardware Issue?
If your phone is having trouble connecting to WiFi, it could be a hardware issue. So you should visit Samsung customer care centre for repair your device.