Connect with us

News

Tesla’s Berlin Gigafactory gets final environmental approvals, but still needs to meet several requirements to start production

Published

on

News on March 7, according to foreign media reports, as previously expected, Tesla’s Gigafactory in Glenhead, Brandenburg, a suburb of Berlin, received final environmental approval on Friday, local time. .

Judging from foreign media reports, the final environmental approval of Tesla’s Berlin Gigafactory was obtained in an updated document published by the state of Brandenburg. The document is 536 pages long.

According to foreign media reports, the environmental approvals obtained by Tesla’s Berlin Gigafactory include electric vehicle factories with an annual production capacity of up to 500,000 vehicles, surface treatment plants, heat generation and storage plants, battery production facilities, and operating wastewater treatment plants. , fire equipment rooms, high-bay warehouses, laboratories and workshops and other facilities.

The final environmental approval includes battery production facilities, which means that in addition to producing electric vehicles, Tesla’s Berlin Gigafactory can also produce batteries nearby.

Although the environmental approval of Tesla’s Berlin Gigafactory has undergone a long wait and encountered challenges during the period, it also caused this factory to fail to start production and delivery of Model Y last year as Tesla expected, but it can be confirmed It took more than two years after construction to obtain the final environmental protection approval, which is relatively fast in the local area.

Foreign media mentioned in the report that the formal environmental approval of Tesla’s Berlin Gigafactory is still being completed quickly, at least relatively speaking. After all, in the past two years, the environmental protection department in Brandenburg has not only needed Factory inspections and approvals are also required for several other large facilities throughout the industrial area. The Minister of Environmental Protection of Brandenburg State also expressed his gratitude to the staff of the department and other agencies for their hard work during the environmental approval process of Tesla’s Berlin Gigafactory.

However, after obtaining final environmental approvals, Tesla’s super factory in Brandenburg needs to meet a number of other requirements before it can be put into production, which is also mentioned in the 536-page document, including air Pollutant measurement devices, fire prevention and accident prevention measures will be reviewed by the relevant competent authority.

News

How to take Screenshot On Samsung Galaxy A54

Published

on

By

Taking screenshots on our smartphones is becoming increasingly common and has become an invaluable part of our technology lives. But do you know how to take a screenshot on your Samsung Galaxy A54?

Whether you’re trying to capture a text conversation with a friend or just need to grab something quickly from the internet, we’ve got you covered with this step-by-step guide. Keep reading to find out how easy it is to take screenshots on your Samsung Galaxy A54!

How to take a screenshot using the physical buttons

  • To take a screenshot using the physical buttons, simply press and hold the power button and the volume down button at the same time.
  • The screen will flash, indicating that a screenshot has been taken.
  • You can find the screenshot in your gallery app.

How to take a screenshot using Palm Swipe

Palm Swipe is a feature that allows you to take a screenshot on your Galaxy S23 Ultra by swiping the edge of your hand across the screen. To use Palm Swipe, follow these steps:

  • Enable Palm Swipe: Go to Settings > Advanced features > Motions and gestures. Enable Palm swipe to capture.
Open Settings
Select Advanced features
Enable Palm swipe to capture
  • Take a screenshot: Place your hand vertically on either side of the screen, then swipe across the screen from one side to the other as if you were taking a photo.
Continue Reading

How To

How to enable Ethernet tethering on Samsung Galaxy A53 smartphone

Published

on

By

Are you looking to learn how to ethernet tethering your Samsung Galaxy A53? With the ability to ethernet tethering, you can share your mobile data connection with other devices, allowing them to access the internet without a Wi-Fi network. Ethernet tethering has traditionally been done using Wi-Fi connections, but with the latest technology, you can now set up tethering using Ethernet connections.

In this guide, we’ll walk you through the steps of setting up Ethernet tethering on your Samsung Galaxy A53 smartphone. We will also discuss some of the benefits and drawbacks of using this method compared to other ways of tethering.

Enable Ethernet tethering on Galaxy A53 smartphone

  • First, go to “Settings
  • Then, click on “Connections
  • Now, you will see “Mobile Hotspot and Tethering” Option, click on it.
  • Then, enable “Ethernet tethering“.

We hope that this article has been able to provide you with some helpful tips and tricks for How to enable Ethernet tethering on Samsung Galaxy A53 smartphone. Now you can share your experiences or capture important information without any hassle!

Continue Reading

News

Fix: Samsung Galaxy Z Flip 3 user facing WiFi connecting Issue

Published

on

By

Tech enthusiasts across the world have been going wild since Samsung announced the launch of the much-anticipated Samsung Galaxy Z Flip 3. From its impressive design to its cutting-edge features, this latest smartphone model is a must-have device for tech savvy users.

Unfortunately, however, some users have reported facing issues in connecting to Wifi networks with their smartphone. If you’re having trouble getting connected with your Galaxy Z Flip 3, don’t worry – we’ve got you covered! In this blog post, we’ll be taking a look at how to fix user-facing WiFi connecting issues on your Samsung Galaxy Z Flip 3. Let’s get started!

How to fix Galaxy Z Flip 3 WIFI not working issue

Restart your device

If your Samsung Galaxy device is not connecting to WiFi, the first thing you should try is restarting your device. To do this, simply power off your phone and then turn it back on. This should fix the problem if it was caused by a temporary glitch.

Toggle the Airplane Mode

If your Samsung Galaxy device is having trouble connecting to WiFi, one of the first things you should try is toggling the Airplane Mode. This setting turns off all wireless connections on your phone, which can sometimes be the cause of the problem. To toggle Airplane Mode, simply pull down the notification shade and tap on the Airplane Mode icon.

Restart Wifi Connections

If your Samsung Galaxy device is having trouble connecting to WiFi, you can try restarting your WiFi connections. To do this, go to Settings > Network & Internet > WiFi and toggle the WiFi off and on. You can also try forgetting the WiFi network and then reconnecting to it. If you’re still having trouble, you can try resetting your device’s network settings. To do this, go to Settings > General Management > Reset > Reset Network Settings.

Connect a different device

If your Samsung Galaxy device is having difficulty connecting to your WiFi network, there are a few things you can try. First, try connecting a different device to the WiFi network. If that device is able to connect without any problems, then the issue is most likely with your phone and not the WiFi network.

Check update

If your phone is having trouble connecting to WiFi, the first thing you should do is check for any available updates. To do this, go to Settings > About device > Software update and see if there are any updates available. If there are, install them and see if that fixes the problem.

Restore Factory

If your Samsung Galaxy device is having trouble connecting to Wi-Fi, you can try restoring the factory settings. This will reset all of your network settings, including your Wi-Fi passwords, so make sure to write them down before you begin. To restore your Galaxy S Ultra to its factory settings:

  1. Open the Settings app and tap “General management.”
  2. Tap “Reset.”
  3. Tap “Factory data reset.”
  4. Tap “Reset device.”
  5. Enter your PIN or password if prompted.
  6. Tap “Continue.”
  7. Tap “Delete all.”

Could It Be A Hardware Issue?

If your phone is having trouble connecting to WiFi, it could be a hardware issue. So you should visit Samsung customer care centre for repair your device.

Continue Reading

Facebook

Trending